Assessment of Efficiency of Bioactive Glass, Self-Assembling Peptide, and Ozone Remineralising Agents on Artificial Carious Lesion

ABSTRACT Objective: To assess the efficacy of bioactive glass, self-assembling peptide, and ozone-remineralizing agents on the artificial carious lesion. Material and Methods: On the extracted 60 premolar teeth, an artificial carious lesion/demineralization was created. Later, the remineralization of demineralized teeth was done with respective remineralizing agents (Group A: Calcium sodium phosphosilicate (bioactive glass), Group B: Self-assembling peptide, Group C: Ozone remineralizing agents and Group D (Control): De ionized water. The degree of demineralization and remineralization were evaluated using the Vickers Hardness Number. Results: There was a decrease in microhardness from baseline to demineralization in all the groups, and this reduction was found to be statistically considerable. After the remineralization of demineralized samples with respective remineralizing agents, there was an increase in microhardness of 312.38, 276.67, and 254.42 in groups A, B, and C, respectively. In contrast, in Group D, there were no changes. Conclusion: Bioactive glass and self-assembling peptides had higher remineralizing capacities, which can be used to treat early carious lesions.

Effect of composite radiopacity and margin location of the restoration on the diagnosis of secondary caries

Abstract This research aimed to evaluate the effect of the radiopacity of a Bulk-Fill composite (X-TraFil, VOCO, Germany) and a Conventional composite (P60, 3M ESPE, USA) and assessment of the margin location in the enamel and dentin on the diagnosis of secondary caries. 76 intact premolars with MOD preparation were divided into two equal groups and filled with the conventional and bulk-fill composite. Four regions were considered to simulate carious lesions (two regions in enamel and two regions in dentin). In each group, half of the regions in the dentin and half in the enamel were randomly selected for secondary caries simulation and filled with a wax-plaster combination while the remaining regions stayed intact. Bitewing imaging was done using the PSP digital sensor. Five examiners reviewed the images, and lesions were recorded. Caries diagnosis indicators and paired-sample t-test were used for statistical analysis. The reproducibility and accuracy of the examiners' responses were evaluated using the kappa and agreement coefficient (α=0.05). The sensitivity, specificity, and accuracy of diagnosing secondary carious lesions in enamel were significantly better under conventional than bulk-fill composite. Similarly, the sensitivity and accuracy of diagnosing secondary caries in dentin were significantly higher under conventional composite than bulk-fill composite (p<0.05). No significant differences were found in the agreement and kappa coefficient between conventional and bulk-fill composites in the enamel and dentin (p>0.05). The diagnostic accuracy of carious lesions was higher under conventional composite than bulk-fill composite. However, the location of the secondary was ineffective in caries diagnosis.

Resumo Essa pesquisa teve como objetivo avaliar o efeito da radiopacidade de resina composta Bulk-Fill (X-TraFil, VOCO, Alemanha) e de resina composta convencional (P60, 3M ESPE, EUA) e a avaliação da localização da margem no esmalte e na dentina no diagnóstico de cárie secundária. 76 pré-molares intactos com preparo MOD foram divididos em dois grupos iguais e restaurados de acordo com o grupo experimental. Quatro regiões foram consideradas para simular lesões de cárie (duas regiões no esmalte e duas regiões na dentina). Em cada grupo, metade das regiões na dentina e metade no esmalte foram selecionadas aleatoriamente para a simulação de cárie secundária e preenchidas com uma combinação de cera e gesso, enquanto as regiões restantes permaneceram intactas. As imagens de bitewing foram feitas usando o sensor digital PSP. Cinco examinadores analisaram as imagens, e as lesões foram registradas. Os indicadores de diagnóstico de cárie e o teste t de amostra pareada foram usados para análise estatística. A reprodutibilidade e a precisão das respostas dos examinadores foram avaliadas usando o kappa e o coeficiente de concordância (α=0,05). A sensibilidade, a especificidade e a precisão do diagnóstico de lesões cariosas secundárias no esmalte foram significativamente melhores com a resina composta convencional do que com a resina composta bulk-fill. Da mesma forma, a sensibilidade e a precisão do diagnóstico de cáries secundárias na dentina foram significativamente maiores com a resina convencional do que com a resina bulk-fill (p<0,05). Não foram encontradas diferenças significativas na concordância e no coeficiente kappa entre as resinas convencionais e bulk-fill no esmalte e na dentina (p>0,05). A precisão do diagnóstico de lesões cariosas foi maior com a resina composta convencional do que com a resina composta bulk-fill. Entretanto, a localização do secundário foi ineficaz no diagnóstico de cárie.

Impact of Molar Incisor Hypomineralization on Oral Health-Related Quality of Life in Brazilian Schoolchildren Aged 8 to 10 Years

ABSTRACT Objective: To assess the impact of Molar Incisor Hypomineralization (MIH) and confounding factors on oral health-related quality of life (OHRQoL) according to the perception of 8 to 10-year-old children and their parents/caregivers. Material and Methods: A cross-sectional study including 403 students aged 8-10 years was carried out, in which OHRQoL was measured using the Child Perceptions Questionnaire administered to both children and parents/caregivers. The diagnosis of MIH was performed according to the previously proposed index. Dental caries experience, malocclusion, and sociodemographic factors were evaluated as confounders. Cluster analysis and Poisson regression with robust variance (p<0.05) were performed. Results: The prevalence of MIH was 13.4%. Parents/caregivers of children with MIH in incisors showed a higher impact prevalence in the emotional well-being domain (PR=1.92; 95%CI=1.16-3.19). Children with hypoplasia had a higher prevalence of negative impact on OHRQoL in the oral symptoms domain (PR=1.51; 95%CI=1.03-2.23). According to the perception of parents/caregivers, dental caries experience had a negative impact on the quality of life of students in the emotional well-being domain (PR=4.19; 95%CI=1.06-16.49) and in the total questionnaire score (PR=3.21; 95%CI=1.06-9.71). Conclusion: According to the perception of parents/caregivers, children with MIH in incisors showed a greater impact on OHRQoL. Additionally, the presence of hypoplasia affected the self-perception of OHRQoL in children, and caries experience influenced the OHRQoL of children, as perceived by parents/caregivers.

Prenatal, neonatal and postnatal factors and the developmental defects of dental enamel / Fatores pré-natais, neonatais e pós-natais e defeitos de desenvolvimento do esmalte dentário

ABSTRACT Objective: To estimate the prevalence of developmental defects in dental enamel and its possible association with prenatal, neonatal and postnatal conditions in six-year-old schoolchildren in a southern Brazilian municipality. Methods: A cross-sectional study was conducted involving 655 six-year-old schoolchildren. Sociodemographic and health data were collected through interviews with mothers and children's oral examinations at schools. Multivariate analyses were performed using Poisson regression with robust estimator. Results: The prevalence of developmental defects of enamel was 44.0%. Demarcated opacities were the most prevalent, followed by diffuse opacities. Late pregnancy, maternal schooling less than eight years, female gender and child's white skin color were independently associated with the prevalence of demarcated opacities. Conclusions: The prevalence of developmental defects in dental enamel was 44.0%. Late pregnancy, maternal schooling less than eight years, female gender and child's white skin color were associated with the prevalences.

RESUMO Objetivo: Estimar a prevalência de defeitos de desenvolvimento do esmalte dentário e sua possível associação com fatores pré-natais, neonatais e pós-natais em escolares de seis anos de idade em um município do sul do Brasil. Métodos: Foi conduzido um estudo transversal envolvendo 655 escolares de seis anos de idade. Os dados sociodemográficos e de saúde foram coletados por meio de entrevistas com as mães e exames bucais das crianças nas escolas. As análises multivariadas foram realizadas por meio de regressão de Poisson com estimador robusto. Resultados: A prevalência de defeitos de desenvolvimento do esmalte foi de 44,0%. As opacidades demarcadas foram as mais prevalentes, seguidas das difusas. Gravidez tardia, escolaridade materna inferior a oito anos, sexo feminino e cor da pele branca da criança foram independentemente associados à prevalência de opacidades demarcadas. Conclusões: A prevalência de defeitos de desenvolvimento do esmalte dentário foi de 44,0%. Gravidez tardia, escolaridade materna inferior a oito anos de estudo, sexo feminino e cor da pele branca da criança estiveram associados às prevalências.

Efeito protetor de enxaguatórios com diferentes fluoretos utilizados previamente aos desafios erosivos/abrasivos em esmalte e dentina / Protective effect of solutions with different fluorides used previously to erosive/abrasive challenges in enamel and dentin

Aim: To evaluate the protection offered by commercial mouthwashes containing sodium fluoride or stannous chloride associated with sodium fluoride to enamel and dentin, prior to erosive and abrasive cycling. Materials and Methods: Enamel and dentin samples were obtained from bovine incisors and subdivided into 3 groups (n=10), according to the fluoridated ingredient tested: FS (sodium fluoride - NaF (225 ppm)); FE (tin fluoride - NaF + SnCl2 (800 ppm Sn2+)); control (distilled water). The samples were submitted to an erosive/abrasive cycle with immersion in citric acid (lemon soda for 5 min, 4×/day, 5 days, with remineralization intervals in artificial saliva for 60 min). Abrasion was carried out with an electric brush (200 g/force) after the first and last cycles, 2x/day, and immediately afterward immersed in the tested solutions. Structure loss was obtained by optical profilometry. The data were subjected to analysis of variance and multiple comparison for each substrate separately. Results: For enamel there was a difference between the groups (p = 0.027), with the FS showing less loss of structure compared to the control 2.02 (±0.48). The FE group showed similar loss to the control and FS 2.32 (±0.58)ab. For dentin there was a difference between the groups (p = 0.011), with FE showing less loss of structure compared to the other groups, 0.82 (25% - 0.34; 75% - 0.95). Discussion: The protection of fluorides in erosive/abrasive challenges depends on the type and dental substrate. Conclusion: Mouthwash with sodium fluoride prior to erosive/abrasive challenges caused less loss of enamel surface, while for dentin, sodium fluoride associated with stannous chloride caused less loss of structure.

Objetivo: Avaliar a proteção oferecida por soluções para bochecho de fluoreto de sódio ou cloreto de estanho associado ao fluoreto de sódio ao esmalte e à dentina, previamente à ciclagem erosiva e abrasiva. Materiais e Métodos: Amostras de esmalte e dentina foram obtidas a partir de incisivos bovinos e subdivididas em 3 grupos (n=10), de acordo com o princípio ativo fluoretado testado: FS (fluoreto de sódio - NaF (225 ppm)); FE (fluoreto de estanho - NaF + SnCl2 (800 ppm Sn2+)); controle (água destilada). As amostras foram submetidas a um ciclo erosivo/abrasivo com imersão em ácido cítrico (refrigerante de limão por 5 min, 4×/dia, 5 dias, com intervalos de remineralização em saliva artificial por 60 min). A abrasão foi realizada com escova elétrica (200 g/força) após o primeiro e o último ciclos, 2×/dia, e logo em seguida imersos nas soluções testadas. A perda de estrutura foi obtida por perfilometria óptica. Os dados foram submetidos à análise de variância e comparação múltipla para cada substrato separadamente. Resultados: Para esmalte houve diferença entre os grupos (p = 0,027), tendo o FS apresentados menor perda de estrutura comparado ao controle 2,02 (±0,48). O grupo FE apresentou perda similar ao controle e ao FS 2,32 (±0,58)ab. Para dentina houve diferença entre os grupos (p = 0,011), sendo que o FE apresentou menor perda de estrutura comparado aos demais grupos 0,82 (25% - 0,34; 75% - 0,95). Discussão: A proteção dos fluoretos em desafios erosivos/abrasivos depende do tipo e do substrato dental. Conclusão: O bochecho com fluoreto de sódio previamente aos desafios erosivos/abrasivos apresentou menor perda de superfície em esmalte, enquanto para dentina o fluoreto de sódio associado ao cloreto de estanho apresentou menor perda de estrutura.

Efecto de los antibióticos pediátricos sobre la microdureza superficial del esmalte dental en dientes bovinos

Objetivo: Comparar el efecto de antibióticos pediátricos sobre la microdureza superficial del esmalte dental en dientes bovinos. Métodos: Se realizó un estudio in vitro en 60 dientes bovinos no cariados. Se sumergieron 15 dientes en cada grupo de cuatro soluciones (amoxicilina, amoxicilina + ácido clavulánico, eritromicina y saliva artificial) durante 1 minuto tres veces al día durante 7 y 14 días. Se midió la microdureza de la superficie del esmalte al inicio, a los7 y 14 días de exposición a los antibióticos. Resultados: La microdureza superficial del esmalte de los dientes de los grupos de antibióticos pediátricos se redujo después de 7 y 14 días de exposición con diferencia significativa (p < 0,001), respecto a la microdureza inicial. Además, en el grupo expuesto a saliva artificial no hubo diferencia significativa (p = 0,097) en los diferentes tiempos de evaluación. Conclusiones: Se concluye que los antibióticos pediátricos afectan la microdureza del esmalte, siendo la eritromicina la que mayor disminución generó a los 14 días de exposición.

Objective: To compare the effect of pediatric antibiotics on the superficial microhardness of dental enamel in bovine teeth. Methods: An in vitro study was carried out on 60 non carious bovine teeth. Fifteen teeth were immersed in each group of four solutions (amoxicillin, amoxicillin + clavulanic acid, erythromycin and artificial saliva) for 1 minute three times a day for 7 and 14 days. Enamel surface microhardness was measured at baseline, 7 and 14 days of antibiotic exposure. Results: The enamel surface microhardness of the teeth of the pediatric antibiotic groups was reduced after seven and 14 days of exposure with significant difference (p < 0.001), with respect to the initial microhardness. In addition, in the group exposed to artificial saliva there was no significant difference (p = 0.097) at the different evaluation times. Conclusions: It is concluded that pediatric antibiotics affect enamel microhardness and erythromycin generated the greatest decrease at 14 days of exposure.

Toothbrushing effects on the surface roughness and cement volume loss of bonded enamel-ceramic interface

Abstract This study evaluated the effect of toothbrushing on enamel-cementing material-ceramic bonded interfaces, using different cementing materials. Materials and Methods: Thirty enamel and thirty ceramic blocks were bonded with cementing materials to produce the samples that were bonded with three types of cementing materials: 1- RelyX Ultimate resin cement (REXU), 2- RelyX Unicem 2 self-adhesive resin cement (REU2) and 3- heated Z100 restorative composite (60°C). Bonded interfaces of the samples were toothbrushed and the surfaces of the 3 cementing materials were evaluated for roughness (RG, in µm), roughness profile (RP, in µm), and volume loss (VL, in µm3) (baseline and after 20,000 and 60,000 toothbrushing cycles). Data were evaluated by Generalized Linear Analysis (two factors: "material" and "toothbrushing cycle") and Bonferroni test (α=0.05). Results: REXU and Z100 exhibited lower RG than that presented by REU2, except after 60,000 toothbrushing cycles when only Z100 differed from REU2. The increase in toothbrushing cycles increased the RG and RP for all materials. REU2 also showed higher RP than those showed by REXU and Z100 when it was analyzed regarding the enamel. The VL of Z100 was the lowest with 20,000 toothbrushing cycles, regarding the enamel and ceramic. For 60,000 cycles, REXU showed the lowest VL regarding the ceramic, and REU2 had the highest VL regarding the enamel and ceramic. Conclusion: In general, REXU and Z100 showed the best results regarding the evaluations performed and the REU2 exhibited the highest RG, RP, and VL.

Resumo Este estudo avaliou o efeito da escovação nas interfaces de união esmalte-material cimentante-cerâmica, utilizando diferentes materiais cimentantes. Materiais e Métodos: Trinta esmaltes e trinta blocos cerâmicos foram unidos com materiais de cimentação para produzir as amostras que foram unidas com três tipos de materiais de cimentação: 1- cimento resinoso RelyX Ultimate (REXU), 2- cimento resinoso autoadesivo RelyX Unicem 2 (REU2) e 3-compósito restaurador aquecido Z100 (60°C). As interfaces coladas das amostras foram escovadas e as superfícies dos 3 materiais cimentantes foram avaliadas quanto à rugosidade (RG, em µm), perfil de rugosidade (RP, em µm) e perda de volume (VL, em µm3) (baseline e após 20.000 e 60.000 ciclos de escovação). Os dados foram avaliados por Análise Linear Generalizada (dois fatores: "material" e "ciclo de escovação") e teste de Bonferroni (α=0,05). Resultados: REXU e Z100 apresentaram menor RG do que REU2, exceto após 60.000 ciclos de escovação, quando Z100 diferiu apenas de REU2. O aumento dos ciclos de escovação aumentou o RG e RP para todos os materiais. O REU2 também apresentou PR maior que o REXU e Z100, quando analisado em relação ao esmalte. O VL de Z100 foi o menor com 20.000 ciclos de escovação em relação ao esmalte e cerâmica. Para 60.000 ciclos, o REXU apresentou o menor VL em relação à cerâmica e o REU2 o maior VL em relação ao esmalte e à cerâmica. Conclusão: De maneira geral, REXU e Z100 apresentaram os melhores resultados nas avaliações realizadas e o REU2 apresentou os maiores RG, RP e VL..

Avaliação dos Efeitos da Remoção da Resina Residual e do Polimento na Superfície do Esmalte após Descolagem do Braquete / Evaluation of the Effects of Residual Resin Removal and Polishing on the Enamel Surface after Bracket Debonding

Considerando o uso de brocas para remoção da resina residual após descolagem do braquete e a possibilidade de injúrias à superfície do esmalte após o uso dessas brocas, este trabalho teve como objetivo realizar um estudo experimental, para avaliar a variação do aspecto superficial do esmalte de forma qualitativa, por meio da avaliação com imagens topográficas do esmalte dentário, utilizando-se a Microscopia Eletrônica de Varredura (MEV), a qual permitiu ilustrar e avaliar a superfície do esmalte após a fase de polimento final, realizada por dois métodos: taça de borracha ou escova Robinson. Foram utilizados 25 dentes pré-molares humanos, obtidos a partir de exodontias em pacientes que procuraram voluntariamente o curso de Residência em Cirurgia da Clínica Odontológica Universitária da Universidade Estadual de Londrina. Os dentes foram divididos em quatro grupos: A, B, C e D, contendo 6 dentes cada, de acordo com as brocas utilizadas para a remoção do remanescente adesivo e o polimento escolhido, além de um dente como "controle". Foi avaliada a rugosidade superficial do esmalte após a remoção da resina e a superfície do esmalte após o polimento com as duas opções apresentadas. Os resultados mostraram que, por observação e inspeção, as brocas removeram a resina residual de todos os dentes, porém, causaram riscos e ranhuras, como evidenciado nas imagens em MEV. Concluiu-se que não houve diferença estatística entre os métodos de polimento e que ambos foram importantes para a redução das marcas abrasivas, proporcionando uma superfície mais lisa do esmalte.

Considering the use of specific burs to remove residual resin after bracket debonding and the possibility of injuries to the dental enamel after using these burs, this study aimed to verify the variation in the enamel surface appearance in a qualitative way and evaluation with topographic images of the dental enamel. The use of Scanning Electron Microscopy (SEM) allowed to illustrate and evaluate the enamel surface after the final polishing phase using two methods: rubber cup or Robinson brush. Twenty-five human premolar teeth were obtained from extractions in patients who voluntarily sought the Oral Maxillofacial Surgery Residency at the Dental School from the State University of Londrina; the teeth were divided into four groups A, B, C and D containing 6 teeth each according to the burs used to remove the remaining adhesive and the chosen polishing, in addition to one tooth as a "control". Dental enamel surface roughness was evaluated after resin removal and enamel surface after polishing with the two methods presented. The results showed that by observation and inspection, the burs removed residual resin from all teeth, however, caused scratches and grooves as evidenced in the SEM images. Based on the results, there was no statistical difference between the polishing methods, and both were important for the reduction of abrasive marks and provided a smoother enamel surface.

Efficacy of ClinproTMXT Varnish surrounding brackets on the enamel surface of white spot lesion

Abstract Orthodontics patients usual develop demineralization and present cavity caries lesions after six months. Minimally invasive procedures have been the goal in modern dental practice. The aim of this study was to evaluate the effect of ClinproTMXT Varnish, on the enamel surface roughness and severity of white spot lesions. Twenty premolars were submitted to bond brackets and experimental induction of demineralization and randomly divided into 2 groups: GI - fluoride varnish (Colgate Duraphat®); GII - Ionomeric Sealant (ClinproTMXT Varnish). The treatment was applied around the brackets. The surface roughness of specimens was analyzed, before treatment and 12 weeks after treatment by laser confocal microscopy, and the severity of the white spot lesion was by laser fluorescence device. The data were analyzed by non-parametric Wilcoxon and Mann-Whitney Test, at 5% significance, roughness percentage reduction was performed. The severity of demineralization decreased in both, GI (p = 0.005) and GII (p = 0.019). Enamel superficial roughness levels decreased in GI and GII. As well as the roughness percentage, being more expressive in the ClinproTMXT Varnish group (85,09%). Colgate Duraphat® or Clinpro™ XT Varnish reduced the severity of the demineralization and decreased the superficial roughness on the enamel. The Clinpro™ XT Varnish was superior to superficial roughness on enamel.

Resumo Pacientes ortodônticos geralmente desenvolvem desmineralização e apresentam lesões de cárie após seis meses de tratamento. Procedimentos minimamente invasivos têm sido o objetivo na prática odontológica moderna. O objetivo deste estudo foi avaliar o efeito do ClinproTM XT selante ionomérico, ao redor do bráquete, com relação a rugosidade superficial do esmalte e a severidade da lesão induzida. Vinte pré-molares foram submetidos a colagem de bráquetes e indução experimental de desmineralização e divididos aleatoriamente em 2 grupos: GI - verniz fluoretado (Colgate Duraphat®); GII - Selante Ionomérico (ClinproTM XT). O tratamento foi aplicado ao redor dos bráquetes. A rugosidade da superfície dos espécimes foi analisada, antes do tratamento e 12 semanas após o tratamento por microscopia confocal a laser e severidade da lesão de mancha branca por dispositivo de fluorescência a laser. Os dados foram analisados pelo teste não paramétrico de Wilcoxon e Mann-Whitney, a 5% de significância. A taxa de redução da lesão foi calculada. A severidade da desmineralização diminuiu tanto no GI (p = 0,005) quanto no GII (p = 0,019). Os níveis de rugosidade superficial do esmalte diminuíram no GI e GII, assim como o percentual de rugosidade, sendo mais expressivo no grupo ClinproTMXT (85,09%). Colgate Duraphat® e Clinpro™ XT reduziram a severidade da desmineralização e diminuíram a rugosidade superficial do esmalte. O selante ionomérico Clinpro™ XT foi superior na redução percentual de rugosidade.

Dentifrícios branqueadores contendo Blue covarine: revisão de literatura / Bleaching dentifrices containing "Blue covarine" literature review

Introdução: O efeito branqueador dos dentifrícios contendo Blue covarine é fundamentado no seu mecanismo de ação, caracterizado pela sua deposição na superfície dentária, alterando a percepção da cor. Objetivo: Revisar a literatura e buscar evidência científica sobre o efeito branqueador do Blue Covarine em tecidos mineralizados e materiais restauradores estéticos. Materiais e métodos: Para a revisão da literatura foram feitas buscas nas bases de dados PubMed, LILACS, BBO, SciELO e MEDLINE para identificar estudos clínicos e laboratoriais que avaliassem a ação branqueadora do agente óptico Blue covarine. Como estratégia de busca foram utilizados os descritores "Blue covarine", "Blue covarine e pasta de dentes", "Blue covarine and toothpaste", "Blue covarine e dentifrícios", "Blue covarine and dentifrices", "Blue covarine e dentifrícios branqueadores", "Blue covarine and whitening dentifrices", "Blue covarine e dentifrícios clareadores", "Blue covarine and bleaching dentifrices", "Blue covarine e pasta de dentes branqueadoras", "Blue covarine and whitening toothpaste", "Blue covarine e pasta de dentes clareadoras", "Blue covarine and bleaching toothpaste". Resultados: Dois pesquisadores selecionaram e analisaram criticamente 31 artigos, sendo 2 revisões da literatura, 4 estudos clínicos e 25 estudos laboratoriais. Divergências quanto ao desenho de estudo, métodos, amostra, critérios clínicos e parâmetros laboratoriais foram observados, além de conflitos de interesse. Conclusão: O Blue Covarine presente nos dentifrícios branqueadores parece ser efetivo na promoção do branqueamento dentário apenas quando associado aos agentes abrasivos presentes nas formulações, evidenciando que ensaios clínicos e laboratoriais, com metodologias semelhantes, são necessários para se obter evidência científica conclusiva sobre o efeito deste agente branqueador.(AU)

Introduction: The whitening effect of dentifrices containing Blue Covarine is based on its mechanism of action, characterized by its deposition on the tooth surface, altering the perception of color. Objective: To review the literature and seek scientific evidence on the whitening effect of Blue Covarine on mineralized tissues and aesthetic restorative materials. Materials and methods: For the literature review, searches were carried out in the PubMed, LILACS, BBO, SciELO and MEDLINE databases, in order to identify clinical and laboratory studies that evaluated the whitening action of the optical agent Blue Covarine. As a search strategy, the descriptors "Blue Covarine", "Blue Covarine and toothpaste", "Blue Covarine and dentifrices", "Blue Covarine and whitening dentifrices", "Blue Covarine and bleaching dentifrices", "Blue Covarine and whitening toothpaste", "Blue Covarine and bleaching toothpaste". Results: Two researchers selected and critically analyzed 31 articles, including 2 literature reviews, 4 clinical studies and 25 laboratory studies. Differences in study design, methods, sample, clinical criteria and laboratory parameters were observed, in addition to conflicts of interest. Conclusion: Blue Covarine present in whitening dentifrices seems to be effective in promoting dental whitening only when associated with abrasive agents present in the formulations, showing that clinical and laboratory tests, with similar methodologies, are necessary to obtain conclusive scientific evidence on the effect of this bleaching agent.(AU)

Lesiones cervicales no cariosas: una revisión sistemática / Non carious cervical lesions: a systematic review

Introducción: las lesiones cervicales no cariosas (NCCL, por sus siglas en inglés) son un grupo de lesiones que afectan el área cervical del órgano dental causando hipersensibilidad dentinaria y defectos estéticos. Objetivo: analizar la literatura sobre las lesiones cervicales no cariosas, su etiología, consideraciones anatómicas, características morfológicas de la lesión y tratamientos no restaurativos. Material y métodos: se realizó una búsqueda en la base de datos PubMed, utilizando las palabras clave: non-carious cervical lesions OR noncarious cervical lesions OR tooth wear OR tooth erosion OR dental abfraction OR abfraction, recopilando un total de 78 artículos. Resultados: es necesario determinar la etiología antes de seleccionar las estrategias de tratamiento para las lesiones cervicales no cariosas. Conocer los distintos tipos de tejidos que componen al órgano dentario facilita la comprensión de los factores que participan en el desarrollo de las lesiones cervicales no cariosas. Esto permite que el tratamiento se enfoque más en la causa del problema que en los síntomas. Con esto podemos modificar diversos factores de manera interceptiva, los tratamientos de terapia con láser y compuestos tópicos son una estrategia mínimamente invasiva. Conclusiones: la mejor manera de describir a las lesiones cervicales no cariosas sería como una enfermedad multifactorial. Se debe prestar especial atención en los métodos de diagnóstico, identificando cofactores que propicien el avance de la lesión, como son la fricción y la biocorrosión. Esta revisión brinda datos que asocian a los factores oclusales como una de las principales causas de una enfermedad que afecta a más de la mitad de la población adulta (AU)

Introduction: non-carious cervical lesions (NCCL) are a group of lesions that affect the cervical area of the dental organ causing dentin hypersensitivity and cosmetic defects. Objective: to know, through a systematic review, the current state of non-carious cervical lesions. Material and methods: a search was conducted in the PubMed database, using the keywords: non-carious cervical lesions OR noncarious cervical lesions OR tooth wear OR tooth erosion OR dental abfraction OR abfraction, compiling a total of 78 articles. Results: determining etiology is necessary before selecting treatment strategies for non-carious cervical lesions (NCCL). Know the different types of tissues that make up the dentary organ, facilitate the understanding of the factors involved in the development of noncarious al cervical lesions. This allows treatment to focus more on the cause of the problem than on symptoms. With this we can modify various factors in an interceptive way, laser therapy treatments and topical compounds, are a minimally invasive strategy. Conclusions: the best way to describe non-carious al cervical lesions would be as a multifactorial disease to which special attention should be paid to both diagnostic methods, identifying cofactors that promote the progression of injury, such as friction and biocorrosion. This review provides data that associates occlusal factors as one of the main causes of a disease that affects more than half of the adult population (AU)

Use of enamel matrix- derived proteins combined with bone graft for the treatment of intrabony defects: overview of reviews (FRISBEE review) / Uso de proteínas derivadas de la matriz del esmalte combinado con injerto óseo para el tratamiento de defectos intraóseos: resumen estructurado de revisiones sistemáticas (revisión FRISBEE)

Introduction: The use of enamel matrix-derived proteins (EMD) has increased in recent years due to their tissue-inducing properties that support periodontal regeneration. This study is an overview of systematic reviews with FRISBEE methodology on the use of EMD alone or combined with autologous bone graft materials (BGM) in the treatment of intrabony defects. Materials and Methods: A systematic search in the Epistemonikos database was performed. RevMan 5.3 and GRADEpro were used for data analysis and presentation Results: Four systematic reviews and two clinical trials were identified. All studies analysed change in probing depth, clinical attachment level, gingival margin level and bone defect depth (all changes in favour of EMD+BGM groups: mean difference (MD): 0.37 mm more, MD: 0.7 mm more, MD: 0.3 mm less, MD: 0.75 more, respectively). Conclusions: Adding autologous bone graft to EMD to treat intrabony defects showed better results, but not a relevant clinical difference compared to the use of EMD alone.

Introducción: El uso de proteínas derivadas de la matriz del esmalte (EMD) ha aumentado en los últimos años debido a sus propiedades inductoras de tejidos que apoyan la regeneración periodontal. Este estudio es una revisión sistemática de revisiones sistemáticas utilizando metodología FRISBEE sobre el uso de EMD solo o combinado con materiales injerto óseo autólogo (BGM) en el tratamiento de defectos intraóseos. Materiales y Métodos: Se realizó una búsqueda sistemática en la base de datos Epistemonikos. Se utilizaron RevMan 5.3 y GRADEpro para el análisis y la presentación de los datos. Resultados: Se identificaron cuatro revisiones sistemáticas y dos ensayos clínicos. Todos los estudios analizaron el cambio en la profundidad de sondaje, el nivel de inserción clínica, el nivel del margen gingival y la profundidad del defecto óseo (todos los cambios a favor de los grupos EMD+BGM: MD: 0,37 mm más, media de diferencia (MD): 0,7 mm más, MD: 0,3 mm menos, MD: 0,75 más, respectivamente). Conclusión: La adición de injerto óseo autólogo a la EMD para tratar defectos intraóseos mostró mejores resultados, pero no una diferencia clínica relevante en comparación con el uso de la EMD sola.

Ozone gas therapy for tooth bleaching preserves enamel microhardness, roughness and surface micromorphology / Ozonioterapia gasosa para clareamento dental preserva a microdureza, rugosidade e micromorfologia superficial do esmalte

ABSTRACT After ozone therapy for bleaching, it is important to evalúate enamel surface properties, to ensure that bleaching provides adequate conditions for sound dental substrate. Aim: The aim of this in vitro study was to evaluate the effects of a bleaching treatment with 10% carbamide peroxide (CP), with or without ozone (O), on the microhardness, roughness and micromorphology of the enamel surface. Materials and Method: Bovine enamel blocks were planed and distributed among the following three bleaching treatment groups (n=10): CP - 1 hour per day/14 days (Opalescence PF 10%/ Ultradent); O - 1 hour per day every 3 days/3 sessions (Medplus VPhilozon, 60 mcg/mL and oxygen flow rate of 1 L/min); and OCP - CP with O, 1 hour per day every 3 days/3 sessions. Enamel surface microhardness (Knoop), roughness (Ra), and micromorphology by scanning electron microscopy (5,000x magnificaron) were determined before and after the treatments. Results: ANOVA and Tukey-Kramer's test showed that enamel microhardness remained unchanged by treatment with O and OCP (p=0.0087), but decreased by treatment with CP. Treatment with O promoted higher enamel microhardness than the other groups (p=0.0169). Generalized linear mixed models for repeated measures over time indicated treatment with CP increased enamel roughness more than OCP or O (p=0.0003). CP produced slight irregularities in enamel micromorphology after the whitening treatment. O, with or without CP, maintained the mechanical and physical properties of microhardness and enamel surface micromorphology, and either maintained or reduced surface roughness, compared to the conventional tray-delivered CP bleaching treatment. Conclusions: Treatment with 10% carbamide peroxide in trays promoted greater changes in enamel surface properties than treatments with ozone and with 10% ozonized carbamide peroxide in the office.

RESUMO É importante avaliar as propriedades da superficie do esmalte após a aplicagao da ozonioterapia para clareamento, para garantir que o efeito clareadorproporcione condigoes adequadaspara um substrato dentário higido. Objetivo: O objetivo deste estudo in vitro foi avaliar os efeitos de um tratamento clareador com peróxido de carbamida (PC) a 10%, associado ou nao ao ozonio (O), na microdureza, rugosidade e micromorfologia da superficie do esmalte. Materials e Método: Blocos de esmalte bovino foram aplainados e distribuidos entre tres grupos de tratamento clareador (n=10): PC - 1 hora por dia/14 dias (Opalescence PF 10%/ Ultradent); O - 1 hora por dia a cada 3 dias/3 sessoes (Medplus VPhilozon, 60 mcg/mL e fluxo de oxigenio de 1 L/min); e PCO - CP com O, 1 hora por dia a cada 3 dias/3 sessoes. A microdureza (Knoop), a rugosidade (Ra) e a micromorfologia da superficie do esmalte avaliada por microscopia eletronica de varredura (aumento de 5.000x) foram analisadas antes e após os tratamentos. Resultados: ANOVA e teste de Tukey-Kramer mostraram que O e PCO mantiveram os valores de microdureza do esmalte ao final do tratamento (p=0,0087), enquanto PC promoveu diminuigao da microdureza. O promoveu maiores valores de microdureza do esmalte do que os outros grupos ao final do tratamento (p=0,0169). Modelos lineares generalizados mistos para medidas repetidas no tempo indicaram um aumento na rugosidade da superficie para PC, levando a maior rugosidade do esmalte ao final do tratamento, em comparagao com PCO ou O (p=0,0003). PC apresentou pequenas irregularidades na micromorfologia do esmalte após o tratamento clareador. O, com ou sem PC, manteve as propriedades mecánicas e fisicas de microdureza e micromorfologia da superficie do esmalte, e manteve ou reduziu a rugosidade da superficie, em comparagao com o tratamento clareador a base de PC aplicado em moldeira convencional. Conclusoes: O tratamento com peróxido de carbamida a 10% para uso em moldeiras promoveu maiores alteragoes nas propriedades de superficie do esmalte do que aquelas observadas nos tratamentos com ozonio e com peróxido de carbamida ozonizado a 10% para uso em consultório.

Effect of experimental bleaching gels with polymers Natrosol and Aristoflex on the enamel surface properties

Abstract Natrosol and Aristoflex® AVC polymers are widely applied in the cosmetic industry and have recently been applied as a thickener option in the composition of dental bleaching gels, with the purpose to reduce the adverse effects on enamel mineral components. The aim of this study was to evaluate the color variation (ΔE* ab, ΔE00, ∆WID), surface roughness (Ra), and mineral content quantification (Raman Spectroscopy) of dental enamel after bleaching treatment with experimental gel-based on 10% carbamide peroxide (CP), containing Carbopol, Natrosol, and Aristoflex® AVC. Sixty bovine teeth were randomly divided into 6 groups (n=10): Negative Control (NC) - no treatment; Positive Control (PC) - Whiteness Perfect 10% - FGM; CP with Carbopol (CPc); CP with Natrosol (CPn); CP with Aristoflex® AVC (CPa); NCP - no thickener. Data were analyzed, and generalized linear models (∆WID -T0 x T1) were used for repeated measurements in time for Ra and with a study factor for ΔE* ab and ΔE00. For the evaluation of the mineral content, data were submitted to one-way ANOVA and Tukey tests. For enamel topographic surface analysis the Scanning Electron Microscope (SEM) was performed. A significance level of 5% was considered. ΔE* ab and ΔE00 were significantly higher for CPc, CPn, CPa, and NCP groups. (∆WID) showed a significantly lower mean than the other groups for NC in T1. After bleaching (4-hour daily application for 14 days), Ra was higher in the CPc, CPn, and PC groups. For CPa, Ra was not altered. No significant difference was found in the quantification of mineral content. CPa preserved the surface smoothness more effectively. Aristoflex® AVC is a viable option for application as a thickener in dental bleaching gels, presenting satisfactory performance, and maintaining the whitening efficacy of the gel, with the advantage of preserving the surface roughness of tooth enamel without significant loss of mineral content.

Resumo Os polímeros Natrosol e Aristoflex® AVC são amplamente utilizados na indústria cosmética e foram recentemente aplicados como uma opção de espessante na composição de géis de clareamento dental, com o objetivo de reduzir os efeitos adversos sobre os componentes minerais do esmalte. O objetivo deste estudo foi avaliar a variação de cor (ΔE*ab, ΔE00, ∆WID), rugosidade da superfície (Ra), e quantificação do conteúdo mineral (Raman Spectroscopy) do esmalte dentário após clareamento dental com gel experimental baseado em 10% de peróxido de carbamida (CP), contendo Carbopol, Natrosol e Aristoflex® AVC. Sessenta dentes bovinos foram divididos aleatoriamente em 6 grupos (n=10): Controle Negativo (CN) - sem tratamento; Controle Positivo (CP) - Brancura Perfeita 10% - FGM; CP com Carbopol (CPc); CP com Natrosol (CPn); CP com Aristoflex® AVC (CPa); NCP - sem espessante. Os dados foram analisados e modelos lineares generalizados (∆WID -T0 x T1) foram usados para medições repetidas no tempo para Ra e com um fator de estudo para ΔE*ab e ΔE00. Para a avaliação do conteúdo mineral, os dados foram submetidos a testes unidirecionais de ANOVA e Tukey. Para a análise da superfície topográfica do esmalte, o Microscópio Eletrônico de Varredura (SEM) foi realizado. Um nível de significância de 5% foi considerado. ΔE*ab e ΔE00 foram significativamente maiores para os grupos CPc, CPn, CPa e NCP. (∆WID) mostrou uma média significativamente menor do que os outros grupos para NC em T1. Após o clareamento (aplicação diária de 4 horas por 14 dias), Ra foi maior nos grupos CPc, CPn e PC. Para CPa, Ra não foi alterado. Nenhuma diferença significativa foi encontrada na quantificação do conteúdo mineral. O CPa preservou a suavidade da superfície de forma mais eficaz. Aristoflex® AVC é uma opção viável para aplicação como espessante em géis de clareamento dental, apresentando desempenho satisfatório e mantendo a eficácia clareadora do gel, com a vantagem de preservar a rugosidade da superfície do esmalte dentário sem perda significativa de conteúdo mineral.

Anticaries potential of a fluoride foam

Abstract Foam has been used worldwide as a vehicle for the professional application of fluoride and hypothetically should have the same anticaries potential as conventional fluoride gel (F-gel) in terms of the formation of reaction products with enamel. Thus, the ability of Flúor Care® foam (FGM, Joinville, SC, Brazil, 12,300 ppm F, acidulated) to react with enamel was evaluated in comparison with Flúor gel® (DFL, Rio de Janeiro, RJ, Brazil, 12,300 ppm F, acidulated). Slabs (n=10/group) of sound enamel and with caries lesion were used, in which the concentrations of total fluoride (TF), and loosely (CaF2-like) and firmly (FAp) bound types were determined. The importance of agitation during application was previously tested. The determinations were made with fluoride ion-specific electrode and the results were expressed in μg F/cm² of the treated enamel area. ANOVA and Tukey tests were used to analyze the difference among treatments, independently for sound and carious enamel. The agitation of the products during application significantly increased the reactivity of the foam (p<0.05), but not that of the gel (p>0.05). The foam did not differ from F-gel (p>0.05) concerning the formation of TF and CaF2-like in sound or carious enamel. Regarding FAp, the foam did not differ from F-gel (p>0.05) in the carious enamel, but the concentration in the sound was lower (p<0.05). The results show that this commercial fluoride foam tested needs to be agitated during application to improve its reactivity with enamel, which raises a question about other brands.

Resumo A espuma tem sido utilizada mundialmente como veículo para aplicação profissional de fluoreto e hipoteticamente deveria ter o mesmo potencial anticárie que o gel fluoretado convencional (F-gel) em termos de formação de produtos de reação com o esmalte. Assim, a capacidade da espuma Flúor Care® (FGM, Joinville, SC, Brasil, 12.300 ppm F, acidulada) de reagir com o esmalte foi avaliada em comparação com o Flúor gel® (DFL, Rio de Janeiro, RJ, Brasil 12.300 ppm F, acidulado). Foram utilizados blocos (n=10/grupo) de esmalte hígido e com lesão de cárie, nos quais foram determinadas as concentrações de flúor total (FT), e os tipos de flúor fracamente (tipo-CaF2) e firmemente (FAp) ligados ao esmalte. A importância da agitação durante a aplicação foi previamente testada. As determinações foram feitas com eletrodo íon específico para fluoreto e os resultados foram expressos em μg F/cm² da área tratada do esmalte. A diferença entre os tratamentos foi analisada por ANOVA e Tukey (α=5%), independentemente para esmalte hígido e cariado. A agitação dos produtos durante a aplicação aumentou significativamente a reatividade da espuma (p<0,05), mas não a do gel (p>0,05). A espuma não diferiu do F-gel (p>0,05) quanto à formação de FT e tipo-CaF2 no esmalte hígido ou cariado. Em relação à FAp, a espuma não diferiu do F-gel (p>0,05) no esmalte cariado, mas a concentração no hígido foi menor (p<0,05). Os resultados mostram que esta espuma fluoretada comercial testada precisa ser agitada durante a aplicação para melhorar sua reatividade com o esmalte, o que levanta questão sobre outras marcas.

Effects of silver diamine fluoride on demineralization protection after a secondary acid challenge

Abstract Objective This investigation describes the effects of 5% sodium fluoride varnish and 38% silver diamine fluoride on demineralization protection of human enamel lesions of three different severities after a secondary acid challenge. Study design Specimens underwent color and enamel surface microhardness change measurements after demineralization and treatment events. Transverse microradiography was conducted following the secondary demineralization. Results After treatments, enamel surface microhardness change showed that 24-hour lesions treated with fluoride varnish had less rehardening than 24-hour lesions treated with silver diamine fluoride (p<0.05), whereas 144-hour lesions from both treatment groups showed a beneficial decrease in surface microhardness change that was markedly better in samples treated with silver diamine fluoride (p<0.05). After the secondary demineralization, 24- and 144-hour lesions treated with silver diamine fluoride showed a sustained beneficial decrease in enamel surface microhardness change when compared to fluoride varnish-treated samples of the corresponding lesion severity (p<0.05). Transverse microradiography showed no difference between fluoride varnish- and silver diamine fluoride-treated samples of any corresponding lesion severity, indicating that remineralization in both fluoride varnish- and silver diamine fluoride-treated samples was proportional to each other after a secondary acid challenge. Conclusions Using silver diamine fluoride may have comparable benefits to fluoride varnish in mineral loss prevention.

Fluorotic Enamel Susceptibility to Dental Erosion and Fluoride Treatment

Abstract The purpose of this in vitro study was to test the hypothesis that fluoride treatment can prevent dental erosion on fluorotic enamel of different severities. It followed a 3×2 factorial design, considering a) fluorosis severity: sound (TF0, Thylstrup-Fejerskov Index), mild (TF1-2), moderate (TF3-4); and b) fluoride treatment: 0 (negative control) and 1150ppmF. Human molars with the three fluorosis severities (n=16, each) were selected and randomly assigned to the two fluoride treatments (n=8). Enamel blocks (4×4mm) were prepared from each tooth and subjected to a dental erosion cycling model, for 10 days. The daily cycling protocol consisted of erosive challenges (1% citric acid, pH 2.4), interspersed by periods of immersion in artificial saliva, and three 2-minute treatments with either 0 or 1150ppm F. The enamel volume loss (mm3) was calculated by subtracting values obtained by microtomography before and after cycling. Two-Way ANOVA showed no significant interaction between fluorosis severity and fluoride treatment (p=0.691), and no significant effect for either fluorosis severity (TF0 mean±standard-deviation: 13.5(10-2±0.42(10-2, TF1-2: 1.50(10-2±0.52(10-2, TF3-4: 1.24(10-2±0.52(10-2, p=0.416) or treatment (0ppmF: 1.49(10-2±0.53(10-2; 1150ppmF: 1.21(10-2±0.42(10-2; p=0.093), when evaluated independently. Considering the limitations of this in vitro study, the presence and severity of fluorosis in enamel do not appear to affect its susceptibility to dental erosion. Fluoride treatment was not effective in preventing the development of dental erosion in both sound and fluorotic enamel substrates under our experimental conditions.

Resumo Este estudo in vitro foi testou a hipótese de que o tratamento com flúor pode prevenir a erosão dentária no esmalte fluorótico de diferentes severidades. O objetivo deste estudo foi: investigar o efeito protetor dos fluoretos contra a erosão e abrasão simuladas no esmalte fluorótico. Seguiu um desenho fatorial 3×2, considerando a) severidade da fluorose em 3 níveis: hígido (TF0, Índice Thylstrup-Fejerskov), suave (TF1-2), moderada (TF3-4); b) tratamento com flúor: 0 (controle negativo) e 1150ppmF. Molares humanos com as três severidades de fluorose (n=16, cada) foram selecionados e distribuídos aleatoriamente para os dois tratamentos com flúor (n=8). Blocos de esmalte (4×4mm) foram preparados a partir de cada dente e submetidos a um modelo de ciclo de erosão dentária, por 10 dias. O protocolo de ciclagem diária consistiu em seis desafios erosivos de 5 minutos (1% de ácido cítrico, pH 2,4), intercalados por seis períodos de imersão em saliva artificial e três tratamentos de 2 minutos com 0 ou 1150ppmF. O volume do esmalte perdido foi calculado subtraindo o perfil superficial 3D obtido por microtomografia antes e depois da ciclagem. A ANOVA de dois fatores não mostrou interação significativa entre a severidade da fluorose e o tratamento com flúor (p = 0,691) e nenhum efeito significativo para a severidade da fluorose (TF0 média+/desvio padrão: 13,5(10-2±0,42(10-2, TF1-2: 1,50(10-2±0,52(10-2, TF3-4: 1,24(10-2±0,52(10-2, p=0,416) ou tratamento (0: 1,49(10-2±0,53(10-2; 1150ppmF: 1,21(10-2±0,42(10-2, p=0,093), quando avaliados independentemente. Considerando as limitações deste estudo in vitro, a presença e severidade da fluorose no esmalte não parece afetar sua suscetibilidade à erosão dentária. O tratamento com flúor não foi eficaz na prevenção do desenvolvimento da erosão dentária em esmalte hígido e fluorótico, sob as condições experimentais utilizadas.

How does arch form and interproximal contact size affect the 3D displacements and rotations of teeth: a finite element analysis

ABSTRACT Objective: The objective of this study was to determine how arch form and interproximal contact size displace mandibular teeth subjected to an anterior component of force (ACF). Methods: Nine finite element models (FEM) of the mandibular arch were developed using Ansys® v. 16.0 software. They were designed to evaluate the effects of three arch forms (triangular, oval, and square) and three contact sizes (point-to-point, 1 mm diameter, and 2 mm diameter). All nine models were subjected to an ACF of 53.8 N (5486 gm). Three-dimensional tooth rotations and displacements of the mandibular teeth were evaluated, from the right first molar to the left first molar. Results: Arch form had a greater effect on tooth movements than contact size. Triangular arches and point-to-point contacts produced the greatest displacements and rotations of teeth. Oval arches with 2 mm wide interproximal contact points showed the greatest stability. The right first premolar showed the greatest displacements in all of the models. Conclusions: Arch form and contact size affect interproximal tooth stability. Teeth are least stable in narrow arches with point-to-point interproximal contacts, and most stable in wider arches with larger contacts.

RESUMO Objetivo: O objetivo deste estudo foi determinar como o formato da arcada e o tamanho do contato interproximal deslocam os dentes inferiores submetidos a um componente anterior de força (CAF). Métodos: Nove modelos de elementos finitos (MEF) da arcada inferior foram desenvolvidos utilizando o software Ansys® v. 16.0. Eles foram projetados para avaliar os efeitos de três formatos de arcada (triangular, oval e quadrado) e três tamanhos de contato interproximal (ponto a ponto, 1 mm de diâmetro e 2 mm de diâmetro). Todos os nove modelos foram submetidos a um CAF de 53,8 N (5486 gm). Foram avaliados tridimensionalmente as rotações dentárias e os deslocamentos dos dentes inferiores, do primeiro molar direito ao primeiro molar esquerdo. Resultados: A forma da arcada teve um efeito maior no movimento dos dentes do que o tamanho do contato interproximal. Arcadas triangulares e contatos ponto a ponto produziram os maiores deslocamentos e rotações dos dentes. Arcadas ovais com pontos de contato interproximal de 2 mm de largura apresentaram maior estabilidade. O primeiro pré-molar direito apresentou os maiores deslocamentos em todos os modelos. Conclusões: O formato da arcada e o tamanho do contato interproximal afetam a estabilidade dos dentes. Os dentes foram menos estáveis nas arcadas estreitas com contatos interproximais ponto a ponto, e mais estáveis nas arcadas mais largas com contatos maiores.

Acid-Base Resistant Zone in Teeth with the Direct Restoration Using Different Adhesive System Generations: A Systematic Review

ABSTRACT Objective: To find out what the acid-base resistant zone (ABRZ) is and the mechanism of its formation. Material and Methods: This systematic review was based on the search of laboratory studies in which selfetching adhesive systems were used. The electronic database PubMed was used for the search. The search began on August 2021 and ended on June 2022. We have analyzed the materials and methods of each research and entered them in the appropriate tables to give a clearer assessment of the obtained results. Results: This systematic review included 15 full-text articles published from 2011 to 2019. The ABRZ is formed on both dentine and enamel. On dentine, the ABRZ is formed only when using self-etching adhesive systems; on the enamel, on the contrary, the step of preliminary etch and rinse contributes to the formation of a thicker ABRZ. The functional monomer MDP and fluorine increase the thickness of the ABRZ and provide a hybrid layer /ABRZ boundary without defects and erosions. Conclusion: Self-etching adhesive systems ensure the creation of an ABRZ resistant to acid-base tests. This phenomenon can provide the resistance of tooth tissues to demineralization, and therefore increase their resistance to caries.

Knowledge of Dentists about Hypomineralization Enamel Defects: A Cross-Sectional Study

ABSTRACT Objective: To evaluate a group of Brazilian dentists on their knowledge of Molar Incisor Hypomineralization (MIH) and Hypomineralized Second Primary Molars (HSPM) related to clinical aspects, consequences, and diagnostic criteria. Material and Methods: In this cross-sectional, the participants were invited by e-mail and Whatsapp® to answer a questionnaire about their knowledge of hypomineralization enamel defects (MIH/HSPM) on the Google Forms® platform. The questionnaire comprised eight questions about personal data and multiple-choice questions about their knowledge concerning clinical aspects, diagnostic criteria of MIH/HSPM and differential diagnosis through clinical images. Chi-square test was applied with the significance level set at 5%. Results: Most participants (n = 492; 91.1%) reported having knowledge about MIH/HSPM. The general dentists gave more incorrect answers (n = 40; 65.6 %;) about dental tissues affected by MIH/HSPM. Overall, 83.3% of the dentists gave the correct answer to which dentitions are associated with this condition. In addition, most dentists presented knowledge about the consequences related to possible fractures (n= 487; 90.2%) and about an increased risk of caries (n= 479; 88.9%) in the affected teeth. Regarding the differential diagnosis performed through clinical images, most participants gave incorrect answers (p≤0.001). Conclusion: The participants presented knowledge about the dentition associated with this condition and possible consequences related to the teeth affected by MIH/HSPM; however, they showed difficulties concerning clinical diagnostic criteria.